RN2901FS~rn2906fs 2007-11-01 1 toshiba transistor silicon pnp epitaxial type (pct process) (bias resi stor built-in transistor) RN2901FS,rn2902fs,rn2903fs rn2904fs,rn2905fs,rn2906fs switching, inverter circuit, interface circuit and driver circuit applications ? two devices are incorporated into a fine pitch small mold (6-pin) package. ? incorporating a bias resistor into a transistor reduces parts count. reducing the parts count enables the manufacture of ever more compact equipment and lowers assembly cost. ? complementary to rn1901fs~rn1906fs equivalent circuit and bias resistor values absolute maximum ratings (ta = 25c) (q1, q2 common) characteristics symbol rating unit collector-base voltage v cbo ?20 v collector-emitter voltage RN2901FS~2906fs v ceo ?20 v RN2901FS~2904fs ?10 emitter-base voltage rn2905fs, 2906fs v ebo ?5 v collector current i c ?50 ma collector power dissipation p c (note 1) 50 mw junction temperature t j 150 c storage temperature range RN2901FS~2906fs t stg ?55~150 c note: using continuously under heavy loads (e.g. the ap plication of high temperature/current/voltage and the significant change in temperature, etc. ) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: total rating unit: mm fs6 0.150.0 5 0.10.05 6 0.80.05 1.00.05 0.70.0 5 1 2 0.10.05 0.3 5 0.3 5 3 1.00.05 0.10.05 5 4 0.4 8 +0.0 2 -0.0 4 1.emitter1 2.base1 3.collector2 4.emitter2 5.base2 6.collector1 (e1) (b1) (c2) (e2) (b2) (c1) jedec D jeita D toshiba 2-1f1d weight: 0.001g (typ.) type no. r1 (k ) r2 (k ) RN2901FS 4.7 4.7 rn2902fs 10 10 rn2903fs 22 22 rn2904fs 47 47 rn2905fs 2.2 47 rn2906fs 4.7 47 r1 r2 b c e equivalent circuit (top view) 6 54 1 2 3 q1 q2
RN2901FS~rn2906fs 2007-11-01 2 electrical characteristics (ta =25c) (q1, q2 common) characteristics symbol test condition min typ. max unit i cbo v cb = ?20 v, i e = 0 ? ? ?100 collector cut-off current RN2901FS~2906fs i ceo v ce = ?20 v, i b = 0 ? ? ?500 na RN2901FS ?0.89 ? ?1.33 rn2902fs ?0.41 ? ?0.63 rn2903fs ?0.18 ? ?0.29 rn2904fs v eb = ?10 v, i c = 0 ?0.088 ? ?0.133 rn2905fs ?0.085 ? ?0.127 emitter cut-off current rn2906fs i ebo v eb = ?5 v, i c = 0 ?0.08 ? ?0.121 ma RN2901FS 30 ? ? rn2902fs 60 ? ? rn2903fs 100 ? ? rn2904fs 120 ? ? rn2905fs 120 ? ? dc current gain rn2906fs h fe v ce = ? 5 v, i c = ?10 ma 120 ? ? collector-emitter saturation voltage RN2901FS~2906fs v ce (sat) i c = ? 5 ma, i b = ?0.25 ma ? ? ? 0.15 v RN2901FS ?1.0 ? ?2.0 rn2902fs ?1.0 ? ?2.2 rn2903fs ?1.1 ? ?2.7 rn2904fs ?1.2 ? ?3.6 rn2905fs ?0.6 ? ?1.1 input voltage (on) rn2906fs v i (on) v ce = ? 0.2 v, i c = ?5 ma ?0.6 ? ?1.2 v RN2901FS~2904fs ?0.8 ? ?1.5 input voltage (off) rn2905fs, 2906fs v i (off) v ce = ? 5 v, i c = ?0.1 ma ?0.4 ? ?0.8 v collector output capacitance RN2901FS~2906fs c ob v cb = ?10 v, i e = 0, f = 1 mhz ? 1.2 ? pf RN2901FS 3.76 4.7 5.64 rn2902fs 8 10 12 rn2903fs 17.6 22 26.4 rn2904fs 37.6 47 56.4 rn2905fs 1.76 2.2 2.64 input resistor rn2906fs r1 ? 3.76 4.7 5.64 k RN2901FS~2904fs 0.8 1.0 1.2 rn2905fs 0.0376 0.0468 0.0562 resistor ratio rn2906fs r1/r2 ? 0.08 0.1 0.12
RN2901FS~rn2906fs 2007-11-01 3 ic - vi(on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi(on) ( v) emmiter common vce= -0.2v 25 -25 RN2901FS ic - vi(on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi(on) ( v) emmiter common vce= -0.2v 25 -25 rn2902fs ic - vi(on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi(on) ( v) emmiter common vce= -0.2v 25 -25 rn2903fs ic - vi(on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi(on) ( v) emmiter common vce= -0.2v 25 -25 rn2904fs ic - vi(on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi(on) ( v) emmiter common vce= -0.2v 25 -25 rn2905fs ic - vi(on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi(on) ( v) emmiter common vce= -0.2v 25 -25 rn2906fs collector current ic ( ma ) collector current ic ( ma ) collector current ic ( ma ) collector current ic ( ma ) collector current ic ( ma ) collector current ic ( ma ) ta=100c ta=100c ta=100c ta=100c ta=100c ta=100c
RN2901FS~rn2906fs 2007-11-01 4 ic - vi(off) -10 -100 -1000 -10000 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 input voltage vi(off) ( v) emitter common vce= -5v 25 -25 RN2901FS ic - vi(off) -10 -100 -1000 -10000 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 input voltage vi(off) ( v) emitter common vce= -5v 25 ic - vi(off) -10 -100 -1000 -10000 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 input voltage vi(off) ( v) emitter common vce= -5v 25 -25 rn2903fs ic - vi(off) -10 -100 -1000 -10000 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 input voltage vi(off) ( v) emitter common vce= -5v 25 -25 rn2904fs ic - vi(off) -10 -100 -1000 -10000 -0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 input voltage vi(off) ( v) emitter common vce= -5v -25 0 ic - vi(off) -10 -100 -1000 -10000 -0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 input voltage vi(off) ( v) emitter common vce= -5v 25 -25 rn2906fs 0 ta=100c ta=100c ta=100c ta=100c ta=100c ta=100c collector current ic ( a ) collector current ic ( a ) collector current ic ( a ) collector current ic ( a ) collector current ic ( a ) collector current ic ( a ) 25 -25 rn2902fs rn2905fs
RN2901FS~rn2906fs 2007-11-01 5 hfe - ic 1 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe emitter common vce= -5v 25 -25 RN2901FS hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe emitter common vce= -5v 25 -25 rn2902fs hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe emitter common vce= -5v 25 -25 rn2963fs rn2903fs hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe emitter common vce= -5v 25 -25 rn2904fs hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe emitter common vce= -5v 25 -25 hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe emitter common vce= -5v 25 -25 ta=100c ta=100c ta=100c ta=100c ta=100c ta=100c rn2905fs rn2906fs
RN2901FS~rn2906fs 2007-11-01 6 vce(sat) - ic -10 -100 -1000 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce(sat) (mv) emitter common ic / ib=20 25 -25 RN2901FS vce(sat) - ic -10 -100 -1000 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce(sat) (mv) emitter common ic / ib=20 25 -25 rn2902fs vce(sat) - ic -10 -100 -1000 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce(sat) (mv) emitter common ic / ib=20 25 -25 rn2903fs vce(sat) - ic -10 -100 -1000 -1 -10 -10 0 collector current ic (ma) collector-emitter saturation voltage vce(sat) (mv) emitter common ic / ib=20 25 -25 vce(sat) - ic -10 -100 -1000 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce(sat) (mv) emitter common ic / ib=20 25 -25 rn2905fs vce(sat) - ic -10 -100 -1000 -1 -10 -100 collector current ic (ma) collecter-emittor saturation voltage vce(sat) (mv) emitter common ic / ib=20 25 -25 rn2906fs ta=100c ta=100c ta=100c ta=100c ta=100c ta=100c rn2904fs
RN2901FS~rn2906fs 2007-11-01 7 type name marking RN2901FS rn2902fs rn2903fs rn2904fs rn2905fs rn2906fs handling precaution when handling individual devices (which are not yet mount ed on a circuit board), be sure that the environment is protected against electrostatic discharge. o perators should wear anti-st atic clothing, and containe rs and other objects that come into direct contact with devices should be made of anti-static materials. type name h0 1 2 3 4 5 6 type name h1 1 2 3 4 5 6 type name h2 1 2 3 4 5 6 type name h3 1 2 3 4 5 6 type name h4 1 2 3 4 5 6 type name h5 1 2 3 4 5 6
RN2901FS~rn2906fs 2007-11-01 8 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduction is permissible only if reproduction is without alteration/omission. ? though toshiba works continually to improve product?s quality a nd reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid sit uations in which a malfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before creating and producing des igns and using, customers mus t also refer to and comply with (a) the latest versions of all relev ant toshiba information, including without limitation, this docume nt, the specifications, the data sheets and applicat ion notes for product and the precautions and conditions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructions for the application that product will be used with or for. custome rs are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluating and det ermining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operati ng parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limit ation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equi pment used for automobiles, trains, ships and other transportation, traffic signalin g equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fi elds. do not use product for unintended us e unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability wh atsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any m ilitary purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technolog y products (mass destruction weapons). product and related softwa re and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. export administration regulations. export and re-export of product or related softw are or technology are strictly prohibited except in comp liance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.
|
